Reverse Osmosis Water Filter Purifier + Pump + RO Membrane + All Filters ROP-5-G

399,950 $

Clear
SKU: N/A

Description

5 STAGE REVERSE OSMOSIS PURIFIER

PRODUCT CODE: ROP-5-G

HIGH FLOW DOMESTIC SYSTEM WITH BOOSTER PUMP AND INSTALL KIT

THIS SYSTEM IS ASSEMBLED, LEAK + PRESSURE TESTED + PERFORMANCE RATED LOCALLY AT OUR QLD PREMISES

Our locally assembled reverse osmosis units are designed to provide the purest possible drinking water at a reasonable price. All of our locally assembled units are leak tested overnight under pressure and checked to ensure that they are operating optimally and producing water of a standard that meets our quality guidelines.

Reverse osmosis technology is known for its ability to produce pure water of a consistent quality, typically reducing the total contaminant in the feed water by +/- 96% on average. Our systems are effective in removing / reducing various contaminants from your drinking water, including fluoride, chlorine, cysts, bacteria and heavy metals among many other contaminants as indicated in the table below.

CONTAMINANT

REDUCTION

CONTAMINANT

REDUCTION

Barium

97%

Potassium

99.9%

Bicarbonate

99.9%

Radium

97%

Cadmium

97%

Selenium

97%

Calcium (Hardness)

99.9%

Silicate

99%

Chromate

95%

Silver

99%

Copper

97%

Sodium

98%

Detergents

97%

Strontium

97%

Fluoride

99%-99.9%

Sulphate

99.9%

Lead

97%

PCB’s

97%

Magnesium

99.9%

Insecticides

97%

Nickel

97%

Herbicides

97%

All of the parts that come into contact with the water in our systems are manufactured from BPA free food grade plastics. All of the filters and parts that we use when assembling your system have NSF INTERNATIONAL (National Sanitation Foundation), WQA (Water Quality Association) or FDA (Food and Drug Administration) quality standard certification.

SYSTEM SPECIFICATIONS:

Minimum feed pressure

15psi / 100kpa

Recommended feed pressure

15-80psi / 100-550kpa

Minimum operating temperature

5°C / 40°F

Maximum operating temperature

45°C / 110°F

Minimum feed water pH

pH 3

Maximum feed water pH

pH 11

Maximum feed water TDS

1000ppm*

Production rate

100GPD / 570LPD

*Where the feed water TDS reading is high, the minimum operating pressure of the unit may be affected. If your feed water TDS is in excess of 400ppm we recommend that you consult us before you purchase. Generally these systems are suited to most town mains water supplies, however if you are intending to use the unit on tank or bore water we recommend testing the feed pressure and water quality first.

KIT INCLUDES:

  • Multi stage reverse osmosis unit:
    • AS3497 tested and compliant 10″x2.5″ pre-filter housings.
    • One 10″x2.5″ 1 micron spun sediment pre-filter.
    • Two 10″x2.5″ 5 micron coconut carbon block pre-filter.
    • One diaphragm pressure booster pump [including Australian approved transformer].
    • One 100GPD NSF compliant TFC membrane made using materials sourced from the USA.
    • One in line post membrane coconut carbon water filter.
  • Your choice of one of the following accumulator tanks:
    • 5 Litre – (33cm height, 20cm diameter).
    • 8 Litre – (39cm height, 22cm diameter).
    • 12 Litre – (39cm height, 26cm diameter)
  • Your choice of one of the following feed/inlet fittings:
    • 1/2″ insert – Shares normal cold water line to most mixer taps.
    • 3/4″ insert – Shares normal cold water line to most dishwasher.
  • Your choice of one of the following waste drain clamp fittings:
    • 40mm solid clamp.
    • 50mm adjustable clamp.
  • An all chrome modern style faucet as pictured in the listing images.
  • An approved 350kpa pressure reducing valve as required by Australian standards.
  • A housing spanner to open and close water filter housings.
  • An installation kit including a roll of tubing, a roll of thread tape, spare fittings.
  • An installation and maintenance guide.


This RO unit has a 24 month warranty which is subject to our warranty terms and conditions and is installed with a pressure reducing valve and leak shut off device

This listing includes a 350kpa pressure reducing and non-return valve as required by Australian Standards AS3497. We also recommend that a leak detector shut off device is installed with any water filter and / or reverse osmosis system which is under pressure which we sell separately in our store here

If you are not entirely satisfied with your purchase please contact us so that we can try to resolve your concerns

Additional information

Tank Size

5L, 5L, 5L, 5L, 8L, 8L, 8L, 8L, 12L, 12L, 12L, 12L

Feed Inlet Fitting

1/2" Insert – Shares normal cold water line to most mixer taps, 1/2" Insert – Shares normal cold water line to most mixer taps, 3/4" Insert – Shares normal cold water line to most dishwasher, 3/4" Insert – Shares normal cold water line to most dishwasher, 1/2" Insert – Shares normal cold water line to most mixer taps, 1/2" Insert – Shares normal cold water line to most mixer taps, 3/4" Insert – Shares normal cold water line to most dishwasher, 3/4" Insert – Shares normal cold water line to most dishwasher, 1/2" Insert – Shares normal cold water line to most mixer taps, 1/2" Insert – Shares normal cold water line to most mixer taps, 3/4" Insert – Shares normal cold water line to most dishwasher, 3/4" Insert – Shares normal cold water line to most dishwasher

Drain Clamp Fitting

40mm solid clamp, 50mm adjustable clamp, 40mm solid clamp, 50mm adjustable clamp, 40mm solid clamp, 50mm adjustable clamp, 40mm solid clamp, 50mm adjustable clamp, 40mm solid clamp, 50mm adjustable clamp, 40mm solid clamp, 50mm adjustable clamp

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.