Description
Features:
- 12V / 24V Auto Detect
- RS485 interface
- Programmable settings
- Common positive PWM solar charge controller
- Multiple load control modes
- Full load operation within the working temperature range
- Extensive electronic protection
Specification:
- Model Number : LS1024B
- Nominal Voltage : 12V DC / 24V DC Auto Detect
- Battery Type : Sealed (Default) / Gel / Flooded / User Defined
- Battery Input Range : 8 ~32V
- Rated Battery Charge Current : 10A
- Rated Discharge Current : 10A
- Max PV Open Circuit Voltage : 50V
- Equalization Voltage :
- Sealed : 14.6V
- Flooded : 14.8V
- User : 9 – 17V
- Boost Voltage :
- Gel : 14.2V
- Sealed : 14.4V
- Flooded : 14.6V
- User : 9 – 17V
- Float Voltage:
- Gel/Sealed/Flooded : 13.8V
- User : 9 – 17V
- Low Voltage Reconnect :
- Gel/Sealed/Flooded : 12.6V
- User : 9 – 17V
- Low Voltage Disconnect :
- Gel/Sealed/Flooded : 11.1V
- User : 9 – 17V
- Self Consumption: < 8.4mA @ 12V / < 7.8mA @ 24V
- Temperature Compensation : -3mV/°C/2V (default)
- Relative Humidity : < 95% non-condensing
- Enclosure : IP30
- Communication : RS485 (RJ45)
- Grounding : Common positive
- Operating temperature range : -35°C to 50°C
- Dimensions : 138.6×69.3x37mm
- Weight : 0.13kg
Please take note:
- This charge controller is not plug-and-play. It needs to be programmed to the specific system being used (battery settings). This cable need to be purchased for programming.
- Recommended for professional and advanced solar users.
Specification Sheet:
User Manual
Reviews
There are no reviews yet.